extruded aluminum profiles for windows & door Wood Finish
|Product||extruded aluminum profiles for windows & door Wood Finish
|Material||Alloy 6060, 6061, 6063, etc.|
|Color||Different colors available (black, blue, green, champagne, bronze,
golden, vermillion, etc.)|
|Surface treatment||Mill finish, anodized, electrophoretic coating, powder coating,
thermal break, wood grain/wood-in-shift, etc.|
|Mould||Based on your drawing or use our mould free|
|Sample time||Usual practice: within 15 working days against payment|
|Usages||Windows, doors, curtain wall, solar panel, LED panel, heat sink,
|Certified||ISO9001-2008 Quality System,|
The surface treatment and characteristics of the aluminum profile
of the heat transfer printing
Thermal transfer wood grain aluminum surface treatment, will spend
on warm lines using thermal transfer printing film to the surface
of aluminum or steel powder coating, wood or stone in order to
achieve the adornment result that, due to its good corrosion
resistance, aging resistance, abrasion resistance, impact
resistance, fire prevention, used outdoors can maintain 15 years
does not change color, with light weight, high strength, excellent
physical and chemical performance. Clear and vivid pattern,
realistic-looking visual effect, make it widely used in doors and
Windows, furniture, indoor and outdoor decoration and building
materials industry, is a new material surface treatment technology
in the world.
Thermal transfer equipment is used for decorative aluminum shaped
materials, all kinds of metal plate and profiles to make them
achieve the result of wood or marble, according to the principle of
heat sublimation thermal transfer equipment works, it can be in 3
to 5 minutes will need wood or marble pattern fast printing to the
aluminum bar section and powder coating surface can penetrate the
coating within 40-60 microns.
The production process of aluminum heat transfer printing is as
1. To cut the heat transfer film (the transfer of the heat transfer
film to 1, 000 meters) to the required size.
2. Transfer the reprinted transfer film;
3. To insert the workpiece into a bag made from the transfer film
on the packaging platform;
4. The improved package printing membrane artifacts on
heat-transfer machine car platform, can put in turn 18 root
aluminum, aluminum ends connected to the vacuum head and lock the,
open the vacuum switch, the printing film tightly on the aluminum,
the car will automatically aluminium material to burn oven,
automatic burn oven temperature of 220 degrees and thermal
insulation for 3 minutes, the car automatically quit burning oven;
5. Loosen the vacuum and remove the workpiece.
6. Remove the transfer film and check the quality of the workpiece.
The process of plate heat transfer printing is as follows:
1. Use a cutting machine to reprint the heat transfer paper (1, 000
meters per volume of the transfer paper).
2. Attach the heat transfer paper membrane to the surface of the
workpiece and place it on the plate heat transfer machine.
3. Push the plate push plate heat transfer machine heating area,
press the press plate switch, the pressure plate will press the
heat transfer paper tightly to the workpiece, heat and keep warm
for one minute;
4. Raise the pressure plate, push the workpiece to section, remove
the transfer film to remove the workpiece and inspect it.